Garage Cabinets Chandler AZ

Custom Garage Cabinets in Chandler, Arizona

Free In-Home Design Consultation: (602) 298-6956

Space Solutions designs and installs custom garage cabinets for homeowners across the City of Chandler and the wider East Valley of the Phoenix metropolitan area. Cabinet systems, workbenches, slatwall, and overhead storage, all built for a garage that spends five months a year well over 120 degrees.

Chandler garages have one thing in common regardless of when the house went up. They were handed over as bare drywall and bare concrete. A 1984 home near Chandler Square got that. A 2019 home near the Airpark got the same thing. The builder finished the house and stopped at the garage door, and everything since has been solved with a shelving unit from a big-box store and a growing pile along the wall.

Why Chandler Homeowners Need Garage Cabinets

Two things drive the Chandler garage project, and neither is really about tidiness.

The first is dust. Monsoon season pushes fine grit through every gap a garage has, and a garage door is mostly gaps. Open shelving means everything on it needs wiping down before you use it. Closed cabinetry solves that permanently, which is why we specify doors on almost every Chandler build rather than open racks.

The second is heat. A closed Chandler garage runs well over 120 degrees through the summer. That temperature is hard on the cheap stuff. Particleboard shelving swells and sags. Adhesives let go. Plastic bins go brittle after a couple of seasons and crack when you move them. Anything built for a climate-controlled basement fails here, and most homeowners have already learned that the expensive way.

Then there is what the garage is actually for. In Chandler, a lot of them are not parking. The Price Corridor puts thousands of engineers and technical professionals inside city limits, and a good share of them want a real workbench with real tool storage rather than a corner of the floor. In Sun Lakes, the garage is where the hobby lives, whether that is woodworking, a bike shop, or a project car, and the owners have both the time and the standards to want it done properly. In Ocotillo and Fulton Ranch, the garage is visible from the street and expected to look like the rest of the house.

Chandler’s older stock adds one more wrinkle. Homes from the 1970s and 1980s often have smaller garages than newer builds, sometimes with the water heater or laundry hookups eating a wall. Those garages need a design that works around obstacles instead of assuming a clean rectangle.

Cabinet Styles and Materials

Our garage cabinet systems come in wall-hung uppers, floor-standing base cabinets, full-height lockers, and combinations of all three. Wall-hung uppers keep the floor clear, which matters in the tighter Chandler garages where you still need to open a car door. Base cabinets carry the heavy items and give you a work surface on top. Full-height lockers handle the long items: rakes, shop vac, folding chairs, camping gear.

Everything mounts to the studs, not to the drywall. In a garage that swings from 50 degrees in January to well past 120 in July, that structural connection is what keeps a loaded cabinet where you put it. We also leave a deliberate gap at the floor so the base of the cabinet never sits in water when you hose the floor down or when a monsoon pushes rain under the door.

Powder-Coated Finishes

Powder coating is baked on rather than sprayed, which produces a finish that resists chipping, scratching, and the UV exposure a Chandler garage sees every time the door opens. It does not yellow the way some painted finishes do after a few Arizona summers. Standard finishes cover the neutral range, with brighter and darker options available.

Custom Color Matching

We can match cabinet color to the house rather than defaulting to builder white. In Ocotillo and Fulton Ranch, where the garage is part of the street view, homeowners frequently match trim or door color so the garage reads as finished space instead of storage. Two-tone builds, with darker bases and lighter uppers, are the most common request.

Aluminum vs. Wood Options

This is the decision most Chandler homeowners want help with, and the honest answer depends on what the garage is for.

Aluminum is the better technical choice for this climate. It does not absorb moisture, does not swell, does not warp, and does not care that the garage hit 125 degrees in July. It is lighter, which makes wall-hung configurations easier to mount securely. It will not host mold in the humidity that comes with monsoon season. If the garage is a working space, or if it holds anything valuable, aluminum is what we recommend.

Wood and wood-composite systems look warmer and cost less up front. They work well in a garage that stays relatively organized and dry, and they suit homeowners who want the space to feel like an extension of the house. The tradeoff is real though: in an uncooled Chandler garage, wood-based materials move with the seasons in a way aluminum does not. We will build it if that is what you want, and we will tell you plainly what to expect.

Most of our Chandler installs end up aluminum for the base and working cabinets, with wood-look finishes where appearance matters most. That combination gets the durability without the garage feeling industrial.

Slatwall and HandiWALL Systems

Slatwall turns a bare garage wall into adjustable vertical storage. PVC slatwall panels take hooks, baskets, brackets, and shelves that reposition in seconds without tools. It suits the things that do not belong in a cabinet: bikes, ladders, long-handled tools, sports gear, hoses. In Chandler’s smaller 1970s and 1980s garages, slatwall is often the highest-value square foot in the whole project, because it stores volume on a wall that was doing nothing.

Locking Cabinet Options

Locking cabinets matter more than people expect. Power tools, chemicals, paint, and anything with a blade belong behind a lock when there are kids or grandkids in the house, and the Sun Lakes projects where grandchildren visit are among the most common requests we get for locking lowers. We can lock individual cabinets or the full run.

Workbench and Tool Storage

A workbench is the difference between a garage that stores projects and a garage where projects happen. Our benches are built at working height with a solid top, base cabinets or drawer banks underneath, and slatwall or a pegboard panel above for the tools you reach for constantly.

Drawer storage beats shelf storage for hand tools, and it is not close. A drawer shows you everything at once. A shelf hides the back two thirds. We size drawer banks to what you actually own, with shallow drawers for hand tools and deeper ones for power tools and cases.

Workbench Configurations

The standard Chandler bench runs 6 to 8 feet with drawers below and slatwall above. In a smaller 1980s garage we build a compact 4-foot bench with a fold-down extension so the footprint disappears when the car needs the space. For the serious workshop builds, common among the engineering and maker crowd here, we run full-wall benches with dedicated zones: assembly, tools, and a clean area for electronics or fine work. Task lighting under the uppers is worth every dollar and is the single most requested add-on.

Combine With Floor Coatings and Overhead Storage

Cabinets solve the walls. A coated floor and overhead racks finish the room, and doing all three at once costs less than doing them separately because we are only mobilizing the crew once.

A garage floor coating handles the part cabinets cannot: the concrete itself, which stains, dusts, and cracks under Arizona conditions. Coating the floor at the same time as the cabinet install means the floor gets done while the garage is already empty, which is the hardest part of the whole job. Our Chandler garage floor coating page covers epoxy and polyaspartic options in detail.

Overhead Storage Combos

Overhead racks mount to the ceiling joists and hold the things you touch twice a year: holiday decorations, luggage, camping gear, the seasonal items that otherwise occupy prime cabinet space. Standard racks carry 400 to 600 pounds when mounted properly into structure. In Chandler’s older, lower-ceilinged garages we check clearance against the garage door track before specifying, since not every garage has the headroom. In Sun Lakes builds we generally keep overhead to a minimum and put daily items at reachable height instead.

Request Your Free Consultation

The process is straightforward. Our designer visits your Chandler home, measures the garage, notes the obstacles, and asks what the space needs to do. Within a week you get a layout and a transparent quote broken out by cabinets, accessories, and installation. Manufacturing runs 2 to 4 weeks. Most garage installs finish in one day, with larger workshop builds taking two.

Common Questions About Garage Cabinets in Chandler

How much do garage cabinets cost in Chandler?
Most Chandler garage cabinet projects run $3,500 to $12,000 depending on wall coverage, material, and whether a workbench and slatwall are included. A partial single-wall run starts lower. A full three-wall workshop build with locking storage and overhead racks runs higher. The free consultation includes an itemized quote.

Will cabinets hold up in an Arizona garage?
Ours will, because they are specified for it. Powder-coated aluminum does not swell, warp, or absorb moisture, and it handles a garage well over 120 degrees without complaint. Everything mounts into studs rather than drywall. We do not use bare particleboard in Chandler garages.

Aluminum or wood for a Chandler garage?
Aluminum for durability, wood for warmth and lower up-front cost. In an uncooled Chandler garage, wood-based materials move with the seasons and aluminum does not. Most of our Chandler installs use aluminum for base and working cabinets, with wood-look finishes where appearance matters.

Can you work around a water heater or laundry hookups?
Yes, and in Chandler’s 1970s and 1980s homes that is routine. Those garages often have obstacles on one wall. The designer measures around them and builds the layout to fit the garage you have rather than a standard rectangle.

How long does installation take?
3 to 6 weeks start to finish. Manufacturing is 2 to 4 weeks. Installation is one day for most garages and two for a full workshop build. If you are adding a floor coating, we schedule both together while the garage is already emptied.

Schedule Your Free Consultation

Call (602) 298-6956 or contact us online to schedule your free garage cabinet design consultation. We serve the City of Chandler, the County of Maricopa, and the wider Arizona metropolitan area from our headquarters at 22515 N. 19th Ave, Phoenix AZ 85027.

More ways to organize your Chandler home: garage floor coatings, custom closets, mudrooms, craft rooms, or the Chandler services hub.

Space Solutions
22515 N. 19th Ave, Phoenix AZ 85027
Serving the City of Chandler, the County of Maricopa, and the Arizona metropolitan area
(602) 298-6956 | A+ BBB Rated | ROC# 248245 | Founded 1991 by Noah and Jennifer Peery. 45,000+ Arizona homes served.