Family Owned and Operated | ROC# 248245 LICENSED • BONDED • INSURED | #1 Cabinet Company Ranking AZ 2023, 2024, 2025, 2026

Custom Laundry Room Mesa AZ

Schedule Your Free Consultation

Use the form below or call 602-298-6956 today.
  • This field is for validation purposes and should be left unchanged.

Custom Laundry Room Solutions in Mesa, Arizona

Free In-Home Design Consultation: (602) 298-6956

Space Solutions designs and installs custom laundry rooms for homeowners across the City of Mesa and the East Valley of the Phoenix metropolitan area. Sealed supply cabinets, a folding counter, drying racks, hanging rods, and pedestals that bring a front-load pair up to working height. Every room gets built around the laundry space you actually have, which in Mesa depends a great deal on which decade your house came out of the ground.

Here is the Mesa reality. The 1980s was the peak build decade in this city: 51,412 homes, more than any other ten-year stretch, and homes built between 1970 and 1999 make up roughly six in ten of everything standing in Mesa today. Most of those laundry rooms have never been touched. They were sized for a top-loading washer, shallower and opening upward, with one wire shelf above the pair. No folding surface. No hanging rod. Detergent on top of the dryer.

Go back further and the picture changes again. Pre-1970 homes in central and west Mesa, the townsite bungalows and post-war ranch houses, often have no laundry room at all. The machines went into a garage corner or a hall closet never framed with them in mind. Then there is the Mesa story no other East Valley city has: the largest seasonal and 55+ population in the region, in homes closed up from June to October. For those, the laundry room doubles as the lock-and-leave utility room. We design all three.

Serving every Mesa neighborhood.
From Dobson Ranch and Alta Mesa to Las Sendas, Red Mountain Ranch, Superstition Springs, Eastmark, the historic districts around Downtown Mesa, and the 55+ communities of east Mesa. Founded by Noah and Jennifer Peery in 1991. 45,000+ Arizona homes served.

How to Modernize Your Mesa Laundry Room

Modernizing a Mesa laundry room means rebuilding the space around front-load machines and the actual sequence of laundry: sort, wash, dry, fold, hang, put away. For most Mesa homes that is reclaiming the air above the pair, adding a folding surface the room never had, and closing the supplies behind doors. The walls and plumbing almost always stay where they are.

Start with the question we ask on every first visit: which era is your house? A 1980s home in Dobson Ranch or Alta Mesa usually has a laundry closet of 25 to 40 square feet behind bifold doors, off the kitchen or the garage entry. The opening was framed around a top-loader 26 to 28 inches deep. A modern front-load pair runs 32 to 34 inches deep once the door and vent are accounted for, and that door swings out into the room. Drop one into a 1984 closet and the bifolds no longer close.

A 1990s home in Superstition Springs or Red Mountain Ranch more often got a small dedicated room, 40 to 70 square feet, with the same single shelf and a lot of blank wall. Those go horizontal: a folding counter along one wall, tall closed cabinets on the other, hampers below. A 2010s Eastmark home came with a walk-in laundry of 70 to 130 square feet, which sounds generous until you notice the builder left it as open floor with one wire shelf. The easiest room in the city to fix, and the one owners wait longest on.

Central Mesa is its own case. In the bungalows and ranch homes of the West Second Street, Evergreen, and Glenwood/Wilbur historic districts, built between 1883 and the late 1950s, the laundry was frequently added decades after the house. The oldest of these sit within a few blocks of the original 1878 townsite. The machines live in a garage corner, a converted porch, or a hall closet with a louvered door. Tight work, and some of the most satisfying we do, because the gap between two machines in a corner and an actual laundry room is a question of cabinetry.

Laundry Room Cabinet and Counter Options

Laundry room cabinets in Mesa should be sealed, square, and tall enough to get every bottle off the machine tops. The item we replace most often is the original wire shelf, which lets powder sift through the grid, tips bottles when the dryer vibrates, and makes the room read as a utility closet. Doors on everything solve both problems at once.

Upper vs. Lower Cabinets

Upper cabinets do most of the work in a Mesa laundry closet. We run thermally fused melamine uppers at 30, 36, and 42-inch heights and carry them toward the ceiling so no open ledge is left to collect lint and dust. Where the laundry opens onto a hallway or the kitchen, common in 1980s Mesa floor plans, solid wood doors match the finish of the rest of the house.

Lower cabinets need a counter above them to earn their footprint, and they pay for it by hiding the parts of laundry nobody wants to see. Soft-close hinges, sealed interiors, and a toe kick that survives a mop. An unsealed cabinet that holds bleach for a year starts to smell like bleach, which is why we spec sealed interiors on every lower we build.

Counter Materials

Material choice matters most on the folding counter. Quartz handles the abuse of a working laundry: a hot iron set down for a second, a dropped pod, a bleach drip nobody noticed. Solid surface is the strong middle option. Laminate works on a tighter budget and shows wear inside about five years at eight or more loads a week. Counter height lands at 36 to 38 inches, or flush with the machine tops on pedestals.

Utility Sink Integration

A deep utility sink earns its space fast. Pre-soaking a stain before it sets. Rinsing a paintbrush. Hand-washing the one shirt that should never see a dryer. We set the sink into the lower run with a sealed cabinet underneath. Where the laundry sits between the garage and the kitchen, that sink becomes the first stop for hands and gear coming in from a yard that, in monsoon season, is mostly dust.

Pull-Out Hampers

Ask a client a month after install what they use most, and the answer is usually the pull-out hampers. Two or three tilt-out bins built into the cabinet run, so sorting happens when the clothes arrive rather than in a floor pile at 9pm. For a seasonal home, a single wide hamper that doubles as a linen cabinet in the off season makes more sense than three. Either way the bins disappear behind a door.

Folding and Drying Stations

A dedicated folding station changes daily life more than any other upgrade in the room. People fold where there is flat space. If that space is the kitchen island or the guest bed, that is where the basket sits for two days. In a 1980s Mesa laundry closet, the counter is usually a fold-down panel hinged into the studs, because there is no floor to give up.

Stackable Configurations

Stacking is usually the move that unlocks a small Mesa laundry. A 27-inch front-load washer with the dryer stacked above frees roughly 9 square feet of floor, and that floor goes straight into a tall cabinet at 84 to 96 inches that swallows the vacuum, the mop, the ironing board, and every supply bottle in one closed run.

One thing to plan for in older Mesa homes. Many 1970s and 1980s laundry alcoves were run on a single appliance circuit, and a stacked pair plus LED cabinet lighting can push that wall past what it was wired for. We recommend a licensed electrician confirm circuit headroom before we manufacture. Same for a dryer vent routed for a machine 6 inches shallower than the one you own now.

Ironing Station Built-Ins

Build the ironing board into the cabinetry and it stops living behind the door. We build a fold-down board into a narrow cabinet bay, or a pull-out version that lives in a drawer slot. A telescoping drying rack that pulls out from a 6-inch-deep bay holds roughly 12 linear feet of line-dry items.

Line drying is worth designing for in Mesa because the climate makes it practical most of the year. During monsoon, June 15 through September 30, when a haboob can coat the patio in an afternoon, an interior rack is the version that actually gets used. Sealed cabinet doors matter for the same reason. Fine dust finds open shelving.

Maximize a Small Laundry Space in Mesa

Maximizing a small Mesa laundry means going vertical, going stacked, and treating the space like a closet system instead of a utility closet. Between 25 and 40 square feet is enough room for a laundry that works. It is not plenty for a wire shelf and a floor pile, which is what most of these rooms have had since the mid-1980s.

Stack the machines first. The floor that frees up becomes a tall cabinet. The second move is the fold-down counter beside the pair. The third is hanging storage, the one people skip: an interior rod inside an upper cabinet for shirts straight from the dryer, plus a second rod for line-dry items. Two rods, roughly 36 inches apiece, in space that held nothing before.

East Mesa’s 55+ communities get a different layout, and the difference is not cosmetic. In a single-level home in Leisure World, Sunland Village, or Dreamland Villa, where some housing dates to 1959, the best laundry room is not the one with the most cabinets. It is the one where everything used weekly sits between knee and shoulder height, the detergent shelf needs no step stool, and a front-load pair on pedestals brings the drum opening to a comfortable working height. Reach drives the design.

Seasonal homes add one more layer. If the house is closed from June through October, the laundry room becomes the storage room for everything that has to survive a summer unattended: linens, cleaning supplies, the vacuum, patio cushions that cannot sit in a garage running well over 120F. That calls for full-height closed cabinetry, no open shelving anywhere, and a layout where the last thing you do before locking the door is close a cabinet, not throw a sheet over a shelf.

Three Eras of Mesa Homes and the Laundry Problem

1980s Mesa home, the single largest vintage in the city (Dobson Ranch, Alta Mesa, east Mesa subdivisions). Closet framed for a shallower top-load pair, one wire shelf, no folding surface. Solution: stacked or pedestal-mounted front-loaders, tall cabinets to the ceiling, fold-down counter, sealed supply storage.

1990s Mesa home (Superstition Springs, Red Mountain Ranch, early Las Sendas). Small dedicated room, 40 to 70 square feet, mostly blank wall. Solution: folding counter on one wall, tall closed cabinetry on the other, pull-out hampers below.

Pre-1970 central and west Mesa home, townsite bungalow or post-war ranch. Often no laundry room at all, just a garage corner, converted porch, or hall closet. Solution: full-height built-in cabinetry that turns a corner with machines in it into a room.

Post-2010 Eastmark home. Walk-in laundry at 70 to 130 square feet, mostly open floor and one shelf. Solution: long folding counter, deep utility sink, drying station, tall closed storage down the wall.

Leisure World, Sunland Village, or Dreamland Villa single-level home. Reach matters more than volume, and the house may sit empty June through October. Solution: pedestals to raise the drum opening, weekly supplies between knee and shoulder height, sealed full-height cabinetry for the lock-and-leave months, seated folding station where the footprint allows.

Our Design Process

The process starts with a free in-home consultation. A Space Solutions designer comes to your Mesa home, measures the laundry space, checks the door swing and the vent run, and asks how laundry actually moves through your week. Twelve loads a week and four loads a week call for different rooms. So does a house occupied five months a year.

About a week later you have a 3D rendering, material samples to choose from, and a line-item quote with nothing hidden in it. Your cabinetry is built in our Phoenix facility over 2 to 4 weeks. Installation is half a day for a stacked-unit retrofit, one day for a mid-size remodel, and one to two days for a walk-in buildout with a utility sink and quartz counter. We haul out the old wire shelving, and you work with the same designer start to finish. For seasonal residents, we schedule the install in the weeks after you arrive in the fall, or before you leave in spring, so the room is finished while you are here to see it.

Noah Peery and Jennifer Peery founded Space Solutions in 1991 and still own and run it from 22515 N. 19th Ave. in Phoenix. The company holds an A+ BBB rating and Arizona Registrar of Contractors license ROC# 248245, and every installation carries a lifetime warranty. If your laundry sits along the garage wall, ask the designer about pairing it with a Mesa mudroom or with garage cabinets on the other side of that wall, since the two projects share a footprint and cost less built together.

Ready to redesign your Mesa laundry room?

Free in-home consultation. 3D design within a week. No pressure, no sales games.

Call (602) 298-6956

Common Questions About Mesa Laundry Rooms

Will modern front-load machines fit in my 1980s Mesa laundry closet?
Usually yes, with planning. The 1980s was Mesa’s peak build decade, and most of those closets were framed around a top-loader 26 to 28 inches deep. A front-load pair runs 32 to 34 inches deep with the door and vent accounted for, and the door swings out instead of up. We measure the opening, door swing, and vent run before anything is manufactured. In a closet under 40 square feet, stacking the pair is usually what makes it work.

How long does a custom laundry room project take in Mesa?
About 3 to 6 weeks from design approval. The cabinetry takes 2 to 4 weeks to build at our Phoenix facility. Install time is half a day for a stacked-unit retrofit, a full day for a typical mid-size remodel, and one to two days when a walk-in laundry gets a utility sink and quartz counter.

Can you schedule a laundry room install around a seasonal home in east Mesa?
Yes. Many of our Mesa clients in Leisure World, Sunland Village, and Dreamland Villa are here from roughly October through May. We book the consultation and the install inside that window so you see the finished room before you leave, and we design the cabinetry closed and sealed for the months the house sits empty. Call before you head north and we will hold a fall slot.

Which materials last longest in a Mesa laundry room?
Cabinet boxes in thermally fused melamine, and sealed interiors instead of raw MDF in any cabinet that stores bleach, detergent, or stain spray. A folding counter that sees daily use should be quartz or solid surface. In lake-adjacent homes in Dobson Ranch, where the air carries more humidity than the rest of the desert, we specify sealed moisture-aware materials as a matter of course.

How much does a custom laundry room cost in Mesa?
Pricing lands in three general tiers. The lowest tier is a stacked-unit retrofit in a 25 to 40-square-foot closet. The middle tier adds a folding counter, tall storage, and pull-out hampers to a mid-size room. At the top is a full walk-in buildout with quartz counter, deep utility sink, and drying station. You get a line-item quote at the free in-home consultation, with no add-ons appearing later.

Schedule Your Consultation

To book your free custom laundry room design consultation, call (602) 298-6956 or contact us online. We serve the City of Mesa, the County of Maricopa, and the wider Arizona metropolitan area from our headquarters at 22515 N. 19th Ave, Phoenix AZ 85027.

More ways to organize your Mesa home: mudrooms, pantries, home offices, kitchen organization, or the Mesa services hub.

Space Solutions
22515 N. 19th Ave, Phoenix AZ 85027
Serving the City of Mesa, the County of Maricopa, and the Arizona metropolitan area
(602) 298-6956 | A+ BBB Rated | ROC# 248245 | Founded 1991 by Noah and Jennifer Peery. 45,000+ Arizona homes served.